The CTMe Series machines offer a complete package for producing high volumes of downspout and elbow products. These machines also have the ability to bend elbow offsets which allows the production of many custom shapes in seamless pieces.
SPEED & EFFICIENCY
The machines can produce downspout at 120' (36.58m) per minute and bend one "A" style elbow every 4.3 seconds. This yields 600 sticks 10' long or 837 elbows in an hour. For efficiency, the elbow bending unit and crimper unit swing in and out to allow automatic crimping of straight pipe. Change overs just take minutes!
RANGE OF MATERIALS
Like always Jobsite equipment is able to run a large range of materials. The CTMe Series can run 24 to 28 gauge steel, .019" to .032" aluminum and 16 to 20 oz half hard copper.*
CONTROL AND ACCURACY
The CTMe Series machines are driven by an electric servo drive which is controlled by a PLC. This state-of-the-art technology allows the user to easily program, via touch screen control, 1 piece to 10,000 pieces at lengths from 3” to 100’ within an 1/32” accuracy. The controller comes pre-programmed with over 200 different shapes.
SAFETY
Each machine comes equipped with sliding safety covers which will disengage the machine when opened. Also, emergency stop switches are located at each end.
DURABILITY
For long life, the machines are engineered with the highest structural integrity and all the forming rollers are hard chrome plated. The innovatively designed urethane drive rollers are easily replaceable.
To help feed the machine each unit includes a PD6 Power Decoiler.
PROFILES
The profiles below are available as well as a variety of round downspout profiles from the RTMe Series. Also, custom profiles can be manufactured.
• CTMe23 - 2x3” (50.8 X 76.2mm)
• CTMe33 - 3x3" (76.2 x 76.2mm)
• CTMe34 - 3x4” (76.2 x 101.6mm)
• CTMe45 - 4X5” (101.6 X 127mm)
• CTMe34m - Metric 74.5 x 100mm
Options
- Custom Power Decoiler
- Run Out Stands
- Overseas Wiring
Specifications
- Length: 223" (576.58cm)
- Width: 51 " (129.54cm)
- Height: 50.25 " (127.64cm)
- Weight: 5,600 lbs. (2540kg)
- Power: 4.6HP servo main drive, 7.5HP hydraulic elbow and crimping drive, 208-230 VAC, 3 Phase, 50/60 HZ
|
Elbow Bending Unit
Swing Arms
Elbow Crimping Unit
PLC (Programmable Logic Control)
Entry End
Hard Chrome Rollers
CTMe Series
To see the CTMe pipe and elbow machine in action click one of the Flash Icons below.
broadband
(high quality with narration)
dial-up
(lower quality without narration)
PD6 - Power Decoiler
JS6 - 6" Gutter Machine
JS5 - 5 " Gutter Machine
|
