The RTMe Series machines offer a complete package for producing high volumes of round downspout and elbow products. These machines also have the ability to bend elbow offsets which allows the production of many custom shapes in seamless pieces.
SPEED & EFFICIENCY
The machines can produce round downspout at 115' (35m) per minute and bend one round elbow every 4.3 seconds. This yields 600 sticks 10' long or 837 elbows in an hour. For efficiency, the elbow bending unit and crimper unit swing in and out to allow automatic crimping of straight pipe. Change overs just take minutes!
RANGE OF MATERIALS
Like always Jobsite equipment is able to run a large range of materials. The RTMe Series can run 24 to 28 gauge steel, .017" to .032" aluminum and 16 to 20 oz half hard copper.*
CONTROL AND ACCURACY
The RTMe Series machines are driven by an electric servo drive which is controlled by a PLC. This state-of-the-art technology allows the user to easily program, via touch screen control, 1 piece to 10,000 pieces at lengths from 3” to 100’ within an 1/16” accuracy. The controller comes pre-programmed with over 200 different shapes.
SAFETY
Each machine comes equipped with sliding safety covers which will disengage the machine when opened. Also, emergency stop switches are located at each end.
DURABILITY
For long life, the machines are engineered with the highest structural integrity and all the forming rollers are hard chrome plated. The innovatively designed urethane drive rollers are easily replaceable.
To help feed the machine each unit includes a PD6 Power Decoiler.
PROFILES
The profiles below are available as well as a variety of square downspout profiles from the CTMe Series. Also, custom profiles can be manufactured.
• RTMe3 - 3" (76mm)
• RTMe4 - 4" (102mm)
Options
- Elbow Placement System
- Custom Power Decoiler
- Run Out Stands
- Overseas Wiring
Specifications
- Length: 312 " (792cm)*
- Width: 52" (132cm)*
- Height: 54" (137cm)*
- Weight: 6,500 lbs. (2950kg)*
- Power: 4.6HP servo main drive, 7.5HP hydraulic elbow and crimping drive, 208-230 VAC, 3 Phase, 50/60 HZ
* Machine sizes vary. Call for exact specifications. |
