SL12/16 - Snap Lock Metal Roofing Panel Machine

Snap Lock metal roofing panel machine standard features include an E-Z cut guillotine shear, one steel reel, a double reel decoiler stand with friction brake and an automatic screw/nail hole slotter. Also offered is a length control limit switch, 10 forming stations, adjustable chrome plated roller, gear, chain and sprocket. Capable of producing up to 35 feet of snap lock metal roofing panel per minute, this machine can be used in both on-site and in-plant operations.

Snap Lock Roof Panel Machine Features

• Manually operated E-Z cut shear
• One steel reel
• Two reel decoiler with friction brake
• Automatic screw/nail hole slotter
• All forming rollers industrial hard chrome plated
• Length control limit switch
• 40 feet of run-out-table
• 10 forming stations

Options

• Extra Spools
• Hydrolic Shear
• Cut-to-Length controler
• 50 Cycle Wiring
• 220 Volt Wiring
• Overseas Wiring

Specifications

• Length: 94 Inches with shear (238.8 cm)
• Width: 30 Inches (762 cm)
• Weight: 1,600 Pounds (725.5 kg)
• Power Supply: 1HP, 110 Volt, 15 Amp, T.E.F.C.
• Speed: 35 Feet (10.668 m) per Minute
• Decoiler capacity: 3,000 Pounds (1,360.3 kg)
• Materials: 24 to 26 gauge steel, 0.027 aluminum
• Coil widths: 16 Inch (406.4 mm), 20 inch (508 mm)

Snap Lock Panels

Hard Chrome Rollers

SL12/16 Roof Panel Machine

To see the SL12/16 snap lock roof panel machine in action click the Flash Icon below.

(broadband recommended)

SL12/16 Snap Lock
Roof Panel Machine Video

RHC - roof hat channel machine
Expandable Decoiler

Metal Roofing Panel Profile